Stamping guide sleeve
The stamping die is a process equipment installed on a press to produce stamping parts, and it is composed of an upper and a lower part that cooperate with each other. The punch is a convex working part that directly forms a punch in the punch, that is, a part whose shape is the working surface. The concave die is a concave working part that directly forms a punch in the die, that is, the part whose inner shape is the working surface. The protective plate is a plate-shaped part that prevents fingers or foreign objects from entering the dangerous area of u200bu200bthe die. The press plate (ring) is a part used in the die to press the stamping material or process parts to control the flow of the material. In the deep drawing die, the press plate is mostly called the press ring. The press bar is a rib-like protrusion used to control the flow of the material in the drawing die or the drawing die. The press bar can be a partial structure of the die or the press ring, or it can be embedded in the die or the press ring Separate parts. The pressure bar is a special name for the pressure bar with a rectangular cross section. See press bar. The bearing plate is a plate-shaped part used to connect the upper plane of the long concave die and support the stamping material. A continuous die is a die with two or more stations, and the material is fed into one station one by one along with the stroke of the press, so that the stamped parts are gradually formed.
The single-process stamping die is a die that only completes one process in one stroke of the press. There are two types of scrap cutters. 1. A cutter installed on the flange trimming die of the drawing part to cut off the entire circle of trimming waste to facilitate removal. 2. A cutter installed on a press or mold to cut strip (belt, roll) waste to a fixed length to facilitate removal. Combined punching die is a universal and adjustable complete set of punching dies that gradually form various punching parts according to geometric elements (straight lines, angles, arcs, holes). The contour of the plane-shaped punching part generally needs several sets of combined punching dies to be punched in stages. The starting stopper pin (plate) is a part used for positioning when the starting end of the material is fed. The first stopper pins (plates) are all movable. Blocks are individual pieces that make up a complete die, punch, discharge plate or fixed plate. The stopper (plate) is a hardened part used for positioning when the material cut by the side edge cuts the gap when it is fed, and it is also used to balance the single-sided cutting force experienced by the side edge. The stop (plate) is generally used in conjunction with the side edge. (Guide: Talking about stamping parts processing technology)
The side edge of the stamping part is a punch that cuts out the feeding positioning gap on the side of the strip (belt, coil). The side pressure plate is a plate-shaped part that exerts pressure on one side of the strip (belt, coil) through a spring to force the other side to abut the guide plate. The ejector rod is a rod-shaped part that directly or indirectly ejects the work (sequence) or the order material with an upward movement. The top plate is a plate-shaped part that moves in the die or module, and directly or indirectly ejects work (sequence) parts or waste materials with an upward movement. The ring gear is a ring-forming tooth-shaped protrusion on a fine blanking die or a toothed pressing plate, and is a partial structure of the concave die or a toothed pressing plate, rather than a separate part. The limit sleeve is a tubular part used to limit the minimum closing height of the die, and is generally sleeved outside the guide post. The limiting column is a column-shaped part that limits the minimum closing height of the die. Locating pins (plates) are parts that ensure that the process parts have a constant position in the mold. They are called locating pins or locating plates due to their different shapes.
More related hardware stamping parts industry news:
